Kenya's construction industry regulation
Kenya's construction industry regulation

Last Updated 29 mins ago by Kenya Engineer

Kenya’s construction industry is facing a potentially significant overhaul of its professional regulatory framework, following the introduction of competing legislative proposals seeking to redefine how architects, quantity surveyors and other built-environment practitioners are registered, licensed and regulated.

At the centre of the debate is the Architectural and Quantity Surveying Practitioners Bill, 2026, which proposes replacing the existing Architects and Quantity Surveyors Act, Cap. 525, with a new framework covering five professional disciplines. The proposal seeks to bring architects, quantity surveyors, landscape architects, interior designers and construction project managers, together with their respective technicians, under a single statutory regulatory institution.

The Bill has, however, attracted opposition from several professional associations, which argue that the proposed structure does not adequately recognise the distinct responsibilities of the different disciplines and could compromise professional independence.

The debate has since acquired another dimension. A separate Architects Bill and Quantity Surveyors Bill had already been introduced in Parliament before the combined Practitioners Bill emerged. More recently, National Assembly Majority Leader Kimani Ichung’wah sponsored another version of the combined legislation, published as National Assembly Bill No. 71 of 2026.

The development raises important questions about the direction of professional regulation in Kenya and whether Parliament is moving towards a unified system, separate profession-specific regulators or a hybrid arrangement.

For an industry in which the design, costing, construction and management of buildings and infrastructure depend on several interconnected professions, the eventual outcome could have far-reaching implications.

A regulatory framework developed nearly a century ago

The principal legislation governing architects and quantity surveyors in Kenya is the Architects and Quantity Surveyors Act, Cap. 525. Its origins date back to the 1934 regulatory framework that established statutory oversight of the two professions.

The law provides for the registration and regulation of architects and quantity surveyors through the Board of Registration of Architects and Quantity Surveyors (BORAQS).

While the framework has served an important purpose, the construction industry has changed considerably since its establishment. Building technologies have advanced, project delivery has become more complex, and professional specialisations have expanded beyond the traditional roles of architects and quantity surveyors.

Construction project management, interior design and landscape architecture, for example, have developed into established areas of professional practice. Their contributions extend to building functionality, environmental performance, construction coordination, accessibility, safety and the overall quality of the built environment.

Yet the statutory framework does not provide equivalent regulatory recognition for all these disciplines.

The need to modernise professional regulation is also informed by persistent concerns about construction quality, unauthorised developments, professional misconduct, inadequate supervision, building failures and the accountability of practitioners involved in construction projects.

A modern regulatory framework could help address these challenges by establishing clear professional entry requirements, enforceable standards of practice, continuing professional development and effective disciplinary mechanisms.

The disagreement is not primarily about whether reform is necessary. It concerns the institutional arrangements through which that reform should be implemented.

How three legislative proposals became part of the debate

The current debate involves three principal legislative proposals that emerged during 2026.

The first is the Quantity Surveyors Bill, 2026, National Assembly Bill No. 6, sponsored by the late Hon. Johana Ng’eno. It proposes establishing the Institute of Quantity Surveyors of Kenya and a Quantity Surveyors Council to provide a dedicated statutory framework for the profession.

The second is the Architects Bill, 2026, National Assembly Bill No. 3, sponsored by Hon. Wanami Wamboka. It seeks to provide for the training, registration and licensing of architects and architectural technicians under a dedicated legislative framework.

Both proposals reflect an approach in which individual professions would have their own statutory regulatory arrangements.

The third proposal takes a different direction. The Architectural and Quantity Surveying Practitioners Bill, 2026, National Assembly Bill No. 47, was published on 22 July 2026. Sponsored by Hon. Joseph K. Tonui, Chairperson of the Departmental Committee on Housing, Urban Planning and Public Works, it proposes bringing five professional disciplines under a common regulatory institution.

Bill No. 47 received its First Reading on 5 August 2026 and was referred to the relevant departmental committee.

A further development came on 6 November 2026, when another Architectural and Quantity Surveying Practitioners Bill was published, this time under the sponsorship of Majority Leader Kimani Ichung’wah.

The new proposal is National Assembly Bill No. 71 of 2026. The National Assembly Order Paper for 19 November 2026 scheduled it for First Reading, alongside a procedural motion to reduce its publication period from 14 days to 13 days.

This is an important distinction. Bill No. 71 is a separately numbered parliamentary Bill, not simply an amendment to Bill No. 47. Both carry the same title and seek to establish a similar regulatory framework.

The appearance of the Majority Leader-sponsored Bill therefore raises questions about the relationship between the two proposals, whether the newer version incorporates changes arising from stakeholder engagements, and how Parliament intends to handle the earlier Bill.

The full text of Bill No. 71 should be examined against Bill No. 47 before any specific changes are attributed to it. Its introduction alone does not establish that the earlier proposal has been withdrawn or that the new one is a response to particular objections.

Nevertheless, the emergence of two combined Bills, alongside the separate Architects and Quantity Surveyors proposals, demonstrates the extent of the unresolved debate over the future regulatory structure of the sector.

What the combined Practitioners Bill seeks to achieve

The July version of the Architectural and Quantity Surveying Practitioners Bill proposes establishing an Architectural and Quantity Surveying Practitioners Board as a statutory corporate body.

The Board would exercise supervision and control over the training, registration and practice of architects, quantity surveyors, landscape architects, interior designers and construction project managers.

Its responsibilities would include approving professional qualifications, conducting qualifying examinations, registering individuals and firms, issuing practising licences and maintaining registers of practitioners and technicians.

The proposed framework distinguishes between professional registration and practising licences. Registration would establish an individual’s recognised professional status, while a valid practising licence would be required to undertake private practice.

The Board would also regulate professional conduct, establish codes of ethics, accredit continuing professional education programmes and provide mechanisms for resolving disputes arising from professional practice.

Another significant provision concerns the registration and licensing of professional firms. This would bring business entities undertaking regulated professional assignments within the Board’s oversight, rather than focusing exclusively on individual practitioners.

The proposed legislation also introduces inspection powers. Authorised officers would be empowered to enter construction sites and business premises to verify compliance and monitor professional work.

The Board would further have authority to determine professional fees and register projects and contracts undertaken by registered practitioners and firms.

These provisions could have significant implications for professional consultancy practices, construction procurement and the cost of delivering building projects.

The proposed functions also extend beyond conventional professional regulation. The Board would be expected to promote research, quality assurance and the adoption of emerging technologies across the built environment.

Notably, the Bill specifically identifies artificial intelligence, green building technologies and climate change mitigation as areas requiring regulatory attention.

It also proposes developing guidelines for design-and-build, turnkey and package-deal construction arrangements, reflecting the changing approaches to project delivery.

In this respect, the proposed law seeks to establish an institution that would regulate professional practice while also contributing to the wider development of the construction industry.

The question of professional independence and representation

One of the most contested aspects of Bill No. 47 is the proposed composition of the regulatory Board.

Under section 7, the Board would comprise a chairperson appointed by the Cabinet Secretary, the Chief Architect and Chief Quantity Surveyor in the responsible ministry, eight additional members appointed by the Cabinet Secretary, and the chief executive officer serving as secretary and ex-officio member.

The eight appointed members would comprise two architects, two quantity surveyors, one landscape architect, one interior designer, one construction project manager and one technician.

Although the proposed composition provides representation for all five disciplines, the appointment structure places considerable authority in the hands of the Cabinet Secretary.

The Architectural Association of Kenya (AAK) has argued that professional regulators should enjoy greater independence and that practitioners should have a more meaningful role in determining their representation.

In its memorandum submitted to the National Assembly committee on 16 October 2026, AAK proposed a more inclusive governance arrangement, including practitioner representation through recognised professional associations and stronger safeguards for the independence of the regulator.

The association’s concern is that a regulator whose leadership is predominantly appointed by government may not adequately reflect the interests and technical requirements of the professions it oversees.

The issue is particularly important because the proposed Board would exercise considerable powers over registration, licensing, professional examinations, disciplinary action and the right to practise.

A decision to suspend a licence or remove a practitioner from the register could affect an individual’s livelihood and professional standing. Such powers require transparent procedures, clear criteria and effective mechanisms for review and appeal.

At the same time, public oversight is necessary because professional decisions in architecture, quantity surveying and construction management have consequences for public safety, investment and the quality of the built environment.

The challenge is to establish a regulatory institution that is independent enough to make professional decisions without undue interference, while remaining accountable to the public.

Why some professional associations oppose the unified approach

The proposal to regulate five different disciplines under one Board has generated significant opposition.

The Architects Alliance, led by Senator Sylvia Kasanga, has argued that architecture requires a dedicated regulatory framework because of the architect’s responsibilities in building design and public safety.

The Alliance maintains that architects, quantity surveyors, landscape architects, interior designers and construction project managers have different qualifications, competencies and professional responsibilities that cannot be adequately addressed through a single regulatory structure.

It has proposed an overarching Built Environment Council to coordinate matters affecting the different professions while allowing individual disciplines to retain their own statutory regulatory institutions.

The Association of Construction Managers of Kenya and the Interior Designers Association of Kenya have also raised concerns about the proposed arrangement.

Their objections centre on the risk of inadequate representation, professional conflicts and the possibility that disciplines with smaller representation could have limited influence over decisions affecting their practice.

Interior design, for example, involves considerably more than selecting finishes and furnishings. It encompasses the planning and functionality of internal spaces, accessibility, health, safety and the performance of buildings in use.

Similarly, construction project management involves specialised responsibilities in project coordination, resource management, procurement, time, cost and quality control.

These responsibilities require professional standards and qualifications appropriate to each discipline.

The professional associations argue that bringing these different disciplines under one Board without sufficiently developed internal structures could weaken specialised oversight.

However, the case for an integrated regulator also has merit. The built environment is inherently multidisciplinary, and projects often require professionals to collaborate throughout the design, construction and operational stages.

A common regulatory framework could help establish consistent standards, improve coordination and reduce gaps in accountability.

The central issue is whether these benefits can be achieved without compromising the professional autonomy and specialised oversight required by individual disciplines.

AAK calls for a coherent legislative framework

AAK’s position provides an important perspective on the debate because the association supports the underlying objective of modernising professional regulation, even as it rejects the July Bill in its current form.

Its October memorandum identifies several areas requiring attention.

One concern relates to transitional arrangements for professions being brought into the new regulatory system.

Architects and quantity surveyors already operate under an established statutory registration framework. Landscape architects, interior designers and construction project managers, however, have not been regulated under Cap. 525 in the same way.

The transition to a new system would therefore need to provide clear pathways for experienced practitioners in these disciplines to obtain recognition and registration.

Without appropriate transitional provisions, practitioners who have been working legitimately for years could face uncertainty over their ability to continue practising.

AAK has also raised concerns about the recognition of professional associations, the Board’s proposed inspection powers and the potential overlap between its functions and those of other statutory institutions.

Of particular significance is the proposed provision giving the Board’s functions precedence where they conflict with other written laws.

The association argues that this could create uncertainty in areas where professional regulation overlaps with existing legislation, including the Engineers Act and the National Construction Authority Act.

The concern is not merely theoretical. Construction projects rely on the work of engineers, architects, quantity surveyors, construction managers and other specialists, each operating within an established legal and professional framework.

Any new regulatory arrangement must clearly define the respective responsibilities of these institutions to avoid conflicting requirements and unnecessary duplication.

AAK has consequently called for Parliament to consider the Practitioners Bill alongside the separate Architects and Quantity Surveyors Bills and work towards one coherent legislative framework.

Concerns over public participation

The debate has also raised questions about the extent of stakeholder involvement in developing the proposed legislation.

In October, a coalition of professional organisations, including the Architects Alliance, the Institution of Engineers of Kenya, the Institution of Surveyors of Kenya and the Law Society of Kenya, called for the legislative process to be paused.

The organisations argued that consultations during the preparation of the proposed framework had not adequately included the wider professional community.

They also raised concerns about the exclusion of young practitioners, graduates, students and academic institutions, despite the potential impact of the proposed registration, internship and licensing requirements on these groups.

Their position is that legislation affecting professional qualifications, entry into practice and the responsibilities of practitioners should be developed through broad and meaningful consultation.

Article 10 of the Constitution identifies public participation as a national value and principle of governance, while Article 118 requires Parliament to facilitate public participation and involvement in its legislative and other business.

Parliament has invited submissions on Bill No. 47, and the departmental committee has undertaken stakeholder engagements. However, the concerns raised by professional organisations demonstrate that the quality and inclusiveness of consultation remain central to the debate.

The introduction of Bill No. 71 also makes it important to establish how stakeholders will be given an opportunity to examine and comment on the newer proposal.

What the changes could mean for construction firms and clients

The implications of the proposed legislation extend beyond the professionals directly covered by it.

For architectural and quantity surveying firms, the proposed registration and licensing requirements could change how professional practices are established and operated.

Firms may face additional compliance obligations, including registration, project and contract registration, and requirements relating to the employment of qualified practitioners.

The proposed authority to determine professional fees is another provision requiring careful consideration. Consultancy fees form part of construction project costs, and changes to the way professional charges are regulated could affect procurement arrangements, pricing and the financial planning of projects.

For developers and clients, stronger professional oversight could improve confidence in the qualifications and accountability of consultants engaged in construction projects.

For contractors, clearer professional responsibilities could help reduce disputes arising from design coordination, cost management, documentation and supervision.

The framework could also strengthen the position of local professionals by establishing consistent standards for professional practice and qualification recognition, including arrangements affecting foreign practitioners.

However, the additional regulatory requirements must be proportionate. Excessive fees, duplicated approvals or complicated licensing procedures could increase the cost of professional services without necessarily improving their quality.

The effectiveness of the legislation will ultimately depend on how its provisions are implemented.

Public safety must remain central

The strongest justification for reform is the protection of the public.

Kenya’s construction industry continues to face challenges involving building collapses, unauthorised developments, inadequate supervision and non-compliance with approved designs.

In January 2026, a building under construction in Nairobi’s South C area collapsed, killing two people. Reports indicated that the development had exceeded the 12-storey height provided for in the approved structural design.

Such incidents highlight the importance of effective professional oversight, but they also demonstrate why regulation must be supported by enforcement throughout the construction process.

A regulator may have the authority to register practitioners, issue licences and inspect construction sites, but these powers must be backed by adequate technical capacity, coordination with county governments and the ability to take timely action against violations.

There must also be clear accountability across the project lifecycle. Professional responsibility should not end with the approval of drawings or the issuance of construction certificates. It must extend to the proper execution of work, compliance with specifications and the protection of people who will occupy and use the completed buildings.

The proposed legislation could strengthen this system, provided that its responsibilities are clearly coordinated with those of BORAQS, the National Construction Authority, county planning authorities and other relevant statutory institutions.

Lessons from international regulatory models

Kenya’s debate is not unique. Other countries have had to balance professional independence with the need for coordination across the built environment.

South Africa offers a useful regional comparison. Its built environment is regulated through several profession-specific statutory councils, including the South African Council for the Architectural Profession, the South African Council for the Quantity Surveying Profession and the South African Council for the Project and Construction Management Professions.

These institutions provide specialised regulatory oversight while operating within a broader statutory framework for the built environment.

The model recognises that different disciplines require distinct professional standards and regulatory expertise.

For Kenya, the relevant lesson is that integration and professional autonomy do not necessarily have to be mutually exclusive. An overarching coordinating institution could provide sector-wide policy direction and collaboration, while profession-specific regulators retain responsibility for registration, technical standards and disciplinary oversight.

Such an arrangement would, however, require clear statutory responsibilities and effective coordination to avoid creating another layer of bureaucracy.

What should the final legislation deliver?

As Parliament considers the competing proposals, the priority should be to establish a regulatory framework that is technically sound, independent, inclusive and capable of protecting the public.

For practitioners, this means clear qualification and registration requirements, fair licensing procedures, recognised professional pathways and transparent disciplinary processes.

For professional associations, it means preserving their ability to contribute to professional development, technical standards and industry representation without confusing their representative roles with the statutory functions of a regulator.

For construction firms and developers, it means predictable requirements and clearly defined professional responsibilities.

For the public, it means greater assurance that the people responsible for designing, costing, managing and delivering buildings and infrastructure have the necessary qualifications and are accountable for their work.

Parliament must also resolve the relationship between the separate Architects and Quantity Surveyors Bills and the two combined Practitioners Bills. Proceeding with overlapping legislation without adequate harmonisation could create conflicting registration requirements, duplicated regulatory functions and uncertainty for firms and practitioners.

The November proposal by the Majority Leader adds urgency to that task. Its relationship with Bill No. 47 needs to be made clear, and stakeholders should have an opportunity to scrutinise its provisions before the legislative process advances.

Kenya has an opportunity to replace a regulatory framework developed in a very different era with one that reflects the complexity and demands of today’s built environment.

The challenge is to ensure that the reform does more than establish a new Board or introduce additional licensing requirements. It must strengthen professional accountability, recognise the distinct contribution of each discipline, encourage collaboration and provide effective safeguards for public safety.

Ultimately, the success of the new framework will be measured not by the number of professions placed under one institution, but by whether it contributes to safer buildings, better-managed construction projects and greater confidence in the professionals responsible for shaping Kenya’s built environment.

LEAVE A REPLY

Please enter your comment!
Please enter your name here